Trademarks: “ICC,” the International Code Council logo and “Accessible and Usable Buildings and Facilities (ICC/ANSI Al )” are trademarks of the. This Accessible and Usable Buildings and Facilities (ICC Al) is a The edition of ANSI Standard A presented the first criteria for accessibil. ICC/ANSI A Accessible and Useable Buildings and Facilities The specifications in this standard make sites facilities buildings and elements.
|Published (Last):||20 August 2016|
|PDF File Size:||4.41 Mb|
|ePub File Size:||19.65 Mb|
|Price:||Free* [*Free Regsitration Required]|
Application and Administration Chapter 1. Visual characters complying with Section Accessible stairs shall comply with Section Passenger loading zones shall have an adjacent access aisle complying with Section Individual Expert IE Nonvoting – Members in this category are individual experts selected to assist the consensus body.
ICC/ANSI A – Accessible and Useable Buildings and Facilities
In Type A and Type B units, reach range for lavatory faucets and soap dispensers is not required. Angela Van Etten, J. Elevator landings shall comply with Section Doors in series shall comply with Section A hand shower with a hose 59 inches mm minimum in length, that can be used as both a fixed shower head and as a hand shower, shall be provided.
Emergency con- trols, including the emergency alarm, shall be grouped at the bottom of the panel. Subscription pricing is determined by: Handset cords, if provided, shall be 29 inches mm minimum in length.
2003 ICC Accessible and Usable Buildings and Facilities
A door a117.-2003 complying with Section For the purpose of this standard, the terms listed in Section A receiver pro- vided for the capture of the stronger of two sig- nals in the receiver field of view shall provide a received power ratio on the order of 20 dB for negligible interference.
Protruding objects on circulation paths shall comply with Section Compartment doors shall not swing into the required minimum area of the compartment. The outlet of the dis- penser shall be 15 inches mm minimum and 48 inches 1 mm maximum above the floor, and shall not be located behind the grab bars.
In alterations, full extensions of handrails shall not be required where z117.1-2003 exten- sions would a117.1-20003 hazardous due to plan con- figuration.
Knee and toe space complying with Section shall be provided. Projections into the clear opening width between 34 inches mm and 80 inches mm above the floor shall not exceed 4 inches mm. Van parking spaces shall be inches mm minimum in width. Changes in level greater than V 4 inch 6.
Full text of “ANSI A (): Accessible and Usable Buildings and Facilities”
The system shall provide both visual and audible signals. In stan- dard roll-in-type showers, the seat shall extend from the control wall to a point within 3 inches 75 mm of the compartment entry. Slope 1 Maximum Rise Steeper than 1: A permanent seat at the head end of the bathtub or a removable in-tub seat shall be pro- vided. Telephones, enclo- sures, and related equipment shall comply with Section Top of gripping surfaces of handrails shall be 34 inches mm minimum and 38 inches mm maximum vertically above stair nosings, ramp surfaces and walking surfaces.
Fire doors shall have the minimum opening force allowable by the appropriate administrative authority.
ANSI A117.1 (2003): Accessible and Usable Buildings and Facilities
The clear floor space shall be 48 inches mm minimum in length and 30 inches mm minimum in width. Handrails shall be provided on both sides of stairs and ramps.
Toe clearance at the side partition is not required in a compartment greater than 66 inches mm in width. End door clear opening width shall be 32 inches mm minimum.
Nosings that project beyond risers shall have the underside of the leading edge curved or bev- eled. Ramp runs shall have a running slope not steeper than 1: Elevator cars shall provide a clear floor area of 42 inches mm minimum in width, and 54 inches mm minimum in depth. Drive up only automatic teller machines and fare machines shall not be required to comply with Section